- To Err is Human: Human Error and Workplace Safety
- July 16, 2015
- Law Firm: Withers Bergman LLP - New Haven Office
- A worker installing a robot at a Volkswagen ('VW') production plant in Germany was killed last week when it grabbed him and crushed him against a metal plate. According to a VW spokesman, initial conclusions indicate human error was to blame.
Even in the absence of further details, attributing the accident solely to human error may prevent constructive action to improve safety. Human error is a frequently deployed explanation: around 90% of industrial accident reports indicate a failure on the part of the injured person or a co-worker. Such explanations are convenient and all-encompassing: blaming individuals who directly cause accidents suggests that such accidents are unavoidable, absolves management of any responsibility, and leads to simple recommendations that the individuals be disciplined, sacked, retrained, or told to be more careful.
In fact, reports stopping at human error usually fail to seek out the underlying causes of an accident. Human beings are prone to making mistakes, but all too frequently organisational issues make such errors inevitable or at least more likely. Very few accidents are associated with a single cause, particularly those involving large organisations or complex technologies. An incident may have one or more immediate causes, basic causes and root causes. Finding the root cause will help to prevent future accidents by leading to improved process design, training and team safety. Human failings are rarely root causes - instead, a systemic approach to safety views human error as a consequence of other failures.
Reports into the causes of several major disasters have stressed both the influence of human error and failures in management and the organisation of safety in the companies concerned. The 1988 Clapham Junction Rail Crash was found to be directly caused by an employee's wiring errors in a relay room. However, the inquiry also highlighted management failures, stating that 'the best of intentions regarding safe working practices was permitted to go hand in hand with the worst of inaction in ensuring that such practices were put into effect.'
Similarly, the investigation into the fire at King's Cross Underground Station in 1987 found that many of the physical and human shortcomings which caused the disaster had been identified by previous internal inquiries into escalator fires, but the recommendations had not been adequately considered by senior managers. The accident arose 'because no one person was charged with overall responsibility for safety.'
Types of human error
According to the Health and Safety Executive ('HSE'), human failures can be active or latent. Active failures are direct and immediate causes of an accident, and are usually made by front-line staff such as drivers or machine operators. There are 3 types of active human error:
- Slips and lapses - made inadvertently by experienced operators during routine tasks
- Mistakes - decisions subsequently found to be wrong, though the maker believed them to be correct at the time
- Violations - deliberate deviations from rules for safe operation of equipment
Mistakes occur where a worker is doing too many or complex tasks at the same time, or is under time pressure: for example, misjudging the time and space needed to complete an overtaking manoeuvre.
Violations, though deliberate, usually stem from a desire to perform work satisfactorily given particular constraints and expectations.
Latent failures are those aspects of an organisation which influence human behaviour and make active failures more likely. Factors which contribute to human error include:
- Job - distractions, lack of time, inadequate procedures, poor lighting or extremes of temperature
- Human - physical ability, competency, fatigue, stress or drugs
- Organisational - work pressure, long hours or insufficient supervision
- Plant and equipment - poor equipment design or workplace layout
What this means for you
Individual risk profiling is vital: organisations with increasingly automated environments face different risks to those where work is carried out by people alone. Companies need to take steps to limit the consequences of their employees' human error, always bearing in mind:
- The fact that no accidents have occurred yet is no indication that working practices are safe
- Human error must be seen in the wider context of the organisation and its management
- If latent failures are not addressed, the probability of repeat accidents will remain high
- Since one latent failure can lead to several possible errors, removing latent failures is extremely cost-effective
- Risk assessments must be individually tailored and regularly reviewed
- Safety policies are ineffective unless they are properly resourced, implemented and reviewed
- An organisation's commitment to safety must be led from the top down
- Measures to eliminate risk, such as using inherently safe products
- Measures to combat risks at source, such as the provision of machinery guards
- Measures to minimise risk relying on human behaviour, such as safe working procedures and the use of personal protective equipment